УДК: 539.384.4
КРИТИЧЕСКАЯ СИЛА ДЛЯ НЕОДНОРОДНОГО УПРУГОГО СТЕРЖНЯ
С.В. БАКУШЕВ, доктор технических наук, профессор, bakuchsv@mail.ru Пензенский государственный университет архитектуры и строительства (ПГУАС)
Страница: 6
Рассматривается неоднородный многослойный сплошной упругий стержень с разнородными слоями параллельными оси стержня и одной из главных плоскостей инерции поперечного сечения. Показано, что формула для вычисления критической силы для упругого многослойного стержня, с разнородными слоями параллельными оси стержня и одной из главных плоскостей инерции поперечного сечения, совпадает с формулой Эйлера для однородного упругого стержня. Использование разнородных упругих стержней, позволяет путем изменения механических характеристик и размеров слоёв стержня, обеспечить выполнение условия равноустойчивости в заданных габаритах поперечного сечения. Рассмотрен числовой пример. Полученные в статье результаты могут быть использованы при проектировании прямолинейных упругих неоднородных стоек зданий и сооружений для обеспечения их прочности и устойчивости с соблюдением условия равноустойчивости в заданных габаритах поперечного сечения.
Ключевые слова: стержень, неоднородность, упругость, устойчивость, критическая сила
UDC: 539.384.4
CRITICAL FORCE FOR INHOMOGENEOUS ELASTIC MEMBER
S.V. Bakushev, bakuchsv@mail.ru The Penza state university of architecture and construction
Page: 6
An inhomogeneous multilayer continuous elastic rod with heterogeneous layers parallel to the axis of the member and one of the main planes of inertia of the cross-section is considered. It is shown that the formula for calculating the critical force for an elastic multilayer member with heterogeneous layers parallel to the axis of the member and one of the main planes of inertia of the cross-sectional section coincides with the Euler formula for a homogeneous elastic member. The use of heterogeneous elastic rods makes it possible to ensure the fulfillment of the condition of equal stability in the given cross-sectional dimensions by changing the mechanical characteristics and sizes of the rod layers. A numerical example is considered. The results obtained in the article can be used in the design of rectilinear elastic heterogeneous racks of buildings and structures to ensure their strength and stability in compliance with the condition of equal stability in the given cross-sectional dimensions.
keywords: rod, heterogeneity, elasticity, stability, critical power
УДК: 624.073.5
АНАЛИЗ НАПРЯЖЕННО-ДЕФОРМИРОВАННОГО СОСТОЯНИЯ ПЛОСКИХ МОНОЛИТНЫХ ПЕРЕКРЫТИЙ С УЧЕТОМ ИХ РЕАЛЬНОЙ РАБОТЫ
Ю.В. НАУМКИНА, кандидат технических наук, доцент, naumkinajv@tyuiu.ru; Л.Р. ЕПИФАНЦЕВА, кандидат технических наук, доцент, epifantsevalr@tyuiu.ru; К.С. ЯЩЕНКО, магистрант, ksusha0711ya@mail.ru
Страница: 16
Проанализировано напряженно-деформированное состояние плоских монолитных перекрытий с учетом их реальной работы в составе каркаса здания. Исследование проводилось в рамках работ по проведению проверочного расчета конструкций монолитного железобетонного каркаса реального объекта в городе Тюмени, заключавшегося в проверке правильности принятых проектных решений в части обеспечения жесткости каркаса здания в связи с выявленными прогибами в плитах перекрытия на данном объекте. Представлены результаты анализа НДС перекрытия численными методом с использованием программного комплекса ЛИРА 10 с учетом таких факторов реальной работы перекрытия, как: гибкость плит, податливость узла «плита - балка опирания», неравномерность осадки опор плиты, нелинейность работы и ползучесть железобетона. Полученные результаты сопоставлены с результатами аналитического расчета. Разработаны конкретные рекомендации по уточнению алгоритмов проектирования аналогичных конструкций. Установлено, что для гибких плит необходимо назначать адекватную расчетную схему, соответствующую действительной работе; выполнять анализ напряженно-деформированного состояния в нелинейной постановке задачи; учитывать влияние на напряженно-деформированное состояние перекрытия неравномерной деформации опор.
Ключевые слова: монолитное железобетонное перекрытие, напряженно-деформированное состояние, численный метод расчета, нелинейный расчет, гибкие плиты, неравномерная деформация опор
UDC: 624.073.5
ANALYSIS OF STRESS-STRAIN STATE OF FLAT MONOLITHIC FLOORS TAKING INTO ACCOUNT THEIR REAL WORK
Yu.V. NAUMKINA – PhD, Ass. Professor, naumkinajv@tyuiu.ru; L.R. EPIFANTSEVA – PhD, Ass. Professor, epifantsevalr@tyuiu.ru; K.S. YASHCHENKO – postgraduate student, ksusha0711ya@mail.ru
Page: 16
The stress-strain state of flat monolithic floors is analyzed taking into account their actual work as part of a building frame. The study was conducted as part of the verification calculation of monolithic reinforced concrete frame structures of a real facility in Tyumen, which consisted in checking the correctness of the adopted design solutions in terms of ensuring the rigidity of the building frame due to the identified deflections in the floor slabs at this facility. The article presents the results of the stress-strain state analysis of the floor using a numerical method and the LIRA 10 software package taking into account such factors of actual floor work as: slab flexibility, ductility of the slab - support beam joint, uneven settlement of slab supports, nonlinearity of work and creep of reinforced concrete. The obtained results are compared with the results of the analytical calculation. Specific recommendations are developed to clarify the design algorithms for similar structures. It has been established that for flexible slabs it is necessary to assign an adequate calculation scheme corresponding to the actual work; perform stress-strain state analysis in a nonlinear problem statement; take into account the influence of uneven deformation of the supports on the stress-strain state of the floor.
keywords: monolithic reinforced concrete floor, stress-strain state, numerical calculation method, nonlinear calculation, flexible slabs, uneven deformation of supports
УДК: 624.014
АНАЛИЗ ПРОСТРАНСТВЕННОЙ ЖЕСТКОСТИ СТАЛЬНОГО КАРКАСА ОДНОПРОЛЕТНОГО ПРОМЫШЛЕННОГО ЗДАНИЯ С ТОРЦЕВЫМИ СВЯЗЯМИ
О.А. ТУСНИНА, кандидат технических наук, доцент, tusninaOA@mgsu.ru
Страница: 31
Колонны однопролетных промышленных зданий при назначении расчетной длины в плоскости поперечных рам с шарнирным креплением ригеля рассматриваются как консольные стержни со свободным верхним концом (μ=2). В каркасах с торцевыми связями поперечные перемещения верхних концов колонн ограничены посредством присоединения их через диск покрытия к торцевым диафрагмам. Это соответствует расчетной схеме колонн с упругим линейным закреплением верхнего конца. На перемещения колонн оказывает влияние жесткость и конструктивное решение связевой системы и ограждающих конструкций покрытия здания, а также расстояние от торцевых диафрагм до рассматриваемой колонны. С целью анализа пространственной жесткости однопролетного каркаса с торцевыми связями выполнены численные расчеты каркасов с соотношением длины к пролету (B/L) от 1.67 до 9.67 с различным конструктивным решением системы связей покрытия. Изучено влияние на перемещения и жесткость каркаса сдвигового диска из ограждающих конструкций кровли. Проанализированы величины сдвиговой жесткости кровли из профлистов различных марок, закрепленных к прогонам в каждой гофре, и из стальных щитов, приваренных к фермам в 4-х точках. По результатам расчетов определены жесткости упругой опоры и коэффициенты расчетной длины колонн с учетом влияния торцевых связей, для каркасов различной длины, с различными схемами связей покрытия, и ограждающими конструкциями кровли из профлиста или стальных щитов. Коэффициенты расчетной длины колонн представлены в табличном и графическом виде и могут быть использованы при проектировании.
Ключевые слова: стальной каркас, промышленное здание, расчетные длины колонн, конечно-элементный расчет, торцевые диафрагмы, упругая опора, сдвиговой диск покрытия, сдвиговая жесткость, стальные щиты кровли, профнастил
UDC: 624.014
ANALYSIS OF THE SPATIAL STIFFNESS OF A SINGLE-SPAN INDUSTRIAL BUILDING STEEL FRAME WITH END BRACES
O.A. TUSNINA, tusninaOA@mgsu.ru
Page: 31
In single-span industrial buildings with hinged beam-to-column connections, columns are typically considered as cantilever members with a free upper end for the purpose of assigning an effective length factor in the plane of the transverse frame (μ=2). In buildings with end braces, the lateral displacement of the column tops is restrained by their connection via the roof diaphragm to the end shear diaphragm. This corresponds to a calculation scheme of a column with an elastic lateral support on its top. The displacements of the columns are influenced by the stiffness and design of the bracing system and the roof cladding, as well as by the distance from the end diaphragms to the considered column. To analyze the spatial rigidity of a single-span frame with end bracings, numerical calculations were performed on frames with length-to-span ratios (B/L) ranging from 1.67 to 9.67, featuring different design solutions for the roof bracing system. The influence of the shear diaphragm formed by the roof cladding on the frame's displacements and stiffness was studied. The magnitudes of in-plane shear stiffness were analyzed for roof decks made of various types of trapezoidal sheeting, fastened to the purlins at every corrugation, and of steel panels welded to the trusses at 4 points. Based on the calculation results, the stiffnesses of the elastic support and the effective length factors for the columns were determined, accounting for the influence of the end bracings. This was done for frames of various lengths, with different roof bracing schemes, and with roof cladding made of either profiled sheets or steel panels. The effective length factors for the columns are presented in tabular and graphical form and can be used for design purposes.
keywords: steel frame, industrial building, column effective length, finite element analysis, end diaphragms, elastic support, roof diaphragm, shear stiffness, steel roof panels, trapezoidal sheeting
УДК: 624.072.014.2
АНАЛИЗ ДЕФОРМАЦИЙ СИНУСОИДАЛЬНО ГОФРИРОВАННЫХ БАЛОК
А.И. ПРИТЫКИН, доктор техническ наук, профессор, prit_alex@mail.ru; А.А МОРОЗОВ, аспирант, morozov99aa@gmail.com
Страница: 48
Проведен численный анализ методом конечных элементов деформаций гофрированных балок с синусоидальной гофрировкой. Исследованы шарнирно опертые балки при действии сосредоточенной силы, при чистом изгибе и равномерно распределенной нагрузке. Проанализирована корректность приведенной в литературе эмпирической зависимости для вычисления прогибов гофробалок путем вариации параметров панелей гофров и габаритных размеров балки. На основании выполненного с использованием программного комплекса ANSYS анализа предложен диапазон параметров гофрировки, в котором приближенная зависимость для вычисления прогибов гофробалок дает приемлемые результаты. Проведенные расчеты показали также, что при одинаковом отношении длины волны к высоте гофров прогибы балок одинаковых габаритных размеров оказываются одинаковыми.
Ключевые слова: балка с синусоидальными гофрами, прогибы, шарнирное опирание, поперечный и чистый изгиб, эмпирическая зависимость, МКЭ
UDC: 624.072.014.2
ANALYSIS OF DEFLECTIONS OF BEAMS WITH SINUSOIDAL CORRUGATION
A.I. Pritykin, prit_alex@mail.ru; A.A. Morozov, morozov99aa@gmail.com
Page: 48
Numerical analysis of deflections of beams with sinusoidal corrugation was fulfilled by the finite element method. It was investigated simply supported beams under action of uniformly distributed load, concentrated load and uniform moment. It was analyzed correctness of empirical relation taken from literature for calculation of deformations of corrugated beams by variation of parameters of corrugation and common dimensions of beams. On base of performed by FEM analysis using program complex ANSYS it was proposed diapason of corrugated parameters in which empirical relation for calculation of maximum deflections of corrugated girders gives reliable results. Performed calculations show also that under identical relations of height of corrugation to the length of wave the deflections of corrugated beams of identical dimensions will be the same.
keywords: girder with sinusoidal corrugation, deflections, simple supports, transverse and pure bending, empirical relation, FEM
УДК: 624.04
РАСЧЕТ МЕМБРАННО-ПНЕВМАТИЧЕСКОГО БОЛЬШЕПРОЛЕТНОГО АНГАРА С УЧЕТОМ НЕЛИНЕЙНЫХ ФАКТОРОВ
В.Е. ХАПИЛИН, преподаватель исследователь, Khapilin2010@yandex.ru
Страница: 54
В данной статье рассматривается и численно исследуется разработанное автором быстровозводимое сооружение, покрывающие большие пролеты, a также статический расчет для проектирования подобных объектов. На текущий момент времени в странах западной Европы, США и Азии набирают популярность пневматические сооружения. Проектные бюро по всему миру рассматривают возможность внедрения на объектах капитального строительства данных сооружений из-за их мобильности, относительно небольшой стоимости, a также экономически выгоды.
Ключевые слова: физическая нелинейность, строительная конструкция, несущая способность, метод конечного элемента, мембранно-пневматические конструкции, воздух, большепролетное сооружение, расчет быстровозводимых большепролетных сооружений с учетом конструктивной и геометрической нелинейности, учет физической нелинейности сжатого воздуха и мембран линзообразного покрытия сооружения
UDC: 624.04
CALCULATION OF A MEMBRANE-PNEUMATIC LONG-SPAN ANGAR TAKING INTO ACCOUNT NON-LINEAR FACTORS
V.E. KHAPILIN
Page: 54
This article discusses and numerically investigates a rapid-erection structure developed by the author that covers large spans, as well as a static analysis for the design of such structures. At the current time, pneumatic structures are gaining popularity in Western Europe, the United States, and Asia. Design bureaus around the world are considering the implementation of these structures in capital construction projects due to their mobility, relatively low cost, and economic benefits.
keywords: physical nonlinearity, building structure, load-bearing capacity, finite element method, membrane-pneumatic structures, air, long-span structure, calculation of fast-erected long-span structures taking into account structural and geometric nonlinearity, taking into account the physical nonlinearity of compressed air and the membranes of the lens-shaped roof of the structure
УДК: 624.074.5
ЖЕЛЕЗОБЕТОННОЕ СТРУКТУРНОЕ ПОКРЫТИЕ: ОСОБЕННОСТИ КОНСТРУКЦИЙ, РАСЧЕТНЫЙ АНАЛИЗ
И.А. Чёрный, аспирант, E-mail: kron_975@mail.ru; Б.С. Соколов, канд. техн. наук; E-mail: moo-shell@mail.ru; В.А. Титаев, канд. техн. наук, доцент, E-mail:titaev@bk.ru.
Страница: 63
Представлены особенности конструкции и результаты расчетного анализа сборного железобетонного структурного покрытия — многосвязной стержневой пространственной системы с предварительно напряженными нижними поясами. Исследование выполнено методом конечных элементов в программных комплексах ЛИРА 10 и ATENA с учетом геометрической и физической нелинейности, а также начальных несовершенств сжатых элементов. Для оценки устойчивости к прогрессирующему обрушению применен динамический метод исключения несущих элементов с эквивалентной импульсной нагрузкой и демпфированием по закону Релея. Показано, что развитие неупругих деформаций и перераспределение жесткости снижает коэффициент динамичности. Показана устойчивость прогрессирующему обрушению структурного покрытия при отказе отдельных элементов без увеличения армирования, принятого для восприятия эксплуатационных нагрузок. Обоснована необходимость проверки сценариев отказа как наиболее нагруженных, так и соседних элементов. Отмечены преимущества железобетонных структурных систем вследствие высокого демпфирования и пластических свойств бетона.
Ключевые слова: большепролетные конструкции, пространственные конструкции, железобетонное структурное покрытие, геометрическая и физическая нелинейность, начальные несовершенства, демпфирование Релея, прогрессирующее обрушение
UDC: 624.074.5
REINFORCED CONCRETE SPACE FRAME STRUCTURE: DESIGN FEATURES AND COMPUTATIONAL ANALYSIS
Cherniy I.A., PhD candidate; Sokolov B.S., PhD (of Technical Sciences); Titaev V.A., PhD (of Technical Sciences), Associate Professor
Page: 63
The paper presents the structural features and computational analysis results of a precast reinforced concrete space frame structure — an indeterminate bar-type space frame with prestressed bottom chords. The study was carried out using the finite element method in LIRA 10 and ATENA software, accounting for geometric and material nonlinearity and initial imperfections of compressed members. To assess robustness against progressive collapse, a dynamic removal method for load-bearing elements was applied with equivalent impulse loading and Rayleigh damping. It is shown that the development of inelastic deformations and stiffness redistribution reduces the dynamic amplification factor. The structural roof demonstrates robustness against progressive collapse upon the loss of individual members without increasing the reinforcement provided for service loads. The necessity of checking failure scenarios for both the most highly loaded and adjacent members is substantiated. The advantages of reinforced concrete structural systems are noted due to the high damping and plastic properties of concrete.
keywords: long-span structures, spatial structures, reinforced concrete space frame structure, geometric and material nonlinearity, initial imperfections, Rayleigh damping, progressive collapse
УДК: 624.04: 699.841
К ВОПРОСУ О ПРИМЕНЕНИИ СКОЛЬЗЯЩЕГО ПОЯСА ДЛЯ СЕЙСМОСТОЙКИХ ЗДАНИЙ
В.Л. МОНДРУС, доктор технических наук, профессор, E-mail: mondrus@mail.com; В.Г. КУЛИКОВ, кандидат технических наук, доцент, E-mail: KulikovVG@mgsu.ru; М.И. МАГОМЕДОВ1, аспирант, преподаватель, E-mail: MagomedovMI@mgsu.ru
Страница: 72
Рассмотрены современные системы сейсмоизоляции зданий и сооружений. Выявлены основные недостатки классического сейсмоизолирующего скользящего пояса. Предложена новая схема сейсмоизоляции зданий и сооружений на основе скользящего пояса. Рассмотрены основные преимущества предложенного метода, заключающиеся в значительном уменьшении материалоемкости фундаментной плиты с одновременным снижением внутренних усилий в элементах конструкции зданий. Проведен динамический расчет зданий с различными системами сейсмоизоляции на двухкомпонентную акселерограмму. Приведены и проанализированы внутренние усилия в вертикальных несущих элементах конструкций.
Ключевые слова: сейсмоизоляция, модифицированный скользящий пояс, фторопласт-4
UDC: 624.04: 699.841
On the Application of a Sliding Belt for Seismic-Resistant Buildings
V.L. MONDRUS, Doctor of Technical Sciences, Professor, E-mail: mondrus@mail.com; V.G. KULIKOV, Candidate of Technical Sciences, Associate Professor, E-mail: KulikovVG@mgsu.ru; Magomed Ismailovich MAGOMEDOV1, Postgraduate Student, Teacher, E-mail: MagomedovMI@mgsu.ru
Page: 72
Modern systems of seismic isolation for buildings and structures are reviewed. The main disadvantages of the classic seismic isolation sliding belt are identified. A new scheme for seismic isolation of buildings and structures based on a sliding belt is proposed. The key advantages of the proposed method are considered, which consist in a significant reduction in the material consumption of the foundation slab while simultaneously reducing internal forces in the structural elements of buildings. A dynamic analysis of buildings with various seismic isolation systems was performed using a two-component accelerogram. The internal forces in the vertical load-bearing structural elements are presented and analyzed.
keywords: seismic isolation, modified sliding belt, polytetrafluoroethylene
